Brady BT-8807 sorbent_spill_control
Brady BT-8807: Tsoft3US 120 Thermally Conductive Material Gap Filler Brady Tsoft3US 120 is a thermally conductive material designed for use between uneven surfaces, offering low thermal resistance and electrical insulation without the need for thermal grease.
Adhesive System Both Side Tacky
Operating Temperature -40°C to 150°C (-40°F to 302°F)
Total Thickness 120 mils (3.048 mm)
Industrial Safety & Asset Marker BT-8807 Application & Installation Blueprint Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering
Installed in real-world industrial environment Inspect Standard Industrial Marking Procedure 1 Ensure application surface is dry and free of loose particulate or heavy oil.
2 Peel and apply with steady firm pressure from center to edge.
3 Allow 24 hours for ultimate cross-linked adhesion strength.
Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.
Substrate Compatibility & Adhesion Matrix Smooth Metals & Stainless Steel
Rigid Thermoplastics & ABS
Tested Environmental Survivability Industrial Plant Temperature Swings Dust, Grease & Mild Fluids Standard Abrasion & Rubbing Long-Term Legend Legibility Recommended Field & Shop Tools:
i3300 / i5100 Benchtop Printer M210 / M610 Handheld Tool Standard Thermal Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for BT-8807 .
Custom orderable roll sizes, continuous tapes, and die-cut parts for BT-8807 are available through authorized Brady distributors.
Quality Assurance, Storage & Regulatory Compliance Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits Min Application Temp: 50°F (10°C)
Service Temp Range: -40°C to 150°C (-40°F to 302°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories Environmental & Safety Standards RoHS 3 Compliance: 2011/65/EU (Pass 2015/863)
REACH Status: SVHC Free (<0.1% w/w)
CA Prop 65: Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-BT-8807]
ASTM Physical & Mechanical Properties Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Physical Property Test Method Standard Test Units (US) Metric Units (SI) Total Thickness ASTM D 1000 120 mils (0.00120 in) 3.048 mm
Thermal Transfer Ribbon Compatibility Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
Chemical Reagent / Solvent Substrate / Adhesive Effect Thermal Ribbon Permanence < 20 ppm (EPA 5021) Tested Tested < 200 ppm (EPA 8270D) Tested Tested
Environmental & Aging Durability Testing Environmental Exposure Condition Observation & Legibility Result Service temperature -40 to 150 °C
Verified Target Applications & Use Cases Industrial rating plates, asset identification, and electrical component labeling. Brady BT-8807 Frequently Asked Questions & Engineering Guide Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for BT-8807 .
Expand All Applications & Sizing
What are the primary industrial applications for Brady BT-8807 (Tsoft3US 120 Thermally Conductive Material Gap Filler)? Brady BT-8807 is a high-performance Industrial substrate designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Both Side Tacky engineered for long-term industrial reliability in environments requiring -40°C to 150°C (-40°F to 302°F) performance.
Temperature & Environment
What is the continuous operating temperature range for Brady BT-8807? Brady BT-8807 is rated for continuous service temperatures from -40°C to 150°C (-40°F to 302°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.
Adhesion & Substrates
How well does Brady BT-8807 adhere to stainless steel, powder coat, and plastic surfaces? Ribbons & Hardware
Which thermal transfer ribbons and Brady printers are compatible with BT-8807? Chemical Resistance
How does Brady BT-8807 withstand industrial chemicals, solvents, and fuels? Standards & Compliance
Is Brady BT-8807 UL Recognized, CSA Accepted, or Halogen-Free? Limitations & Troubleshooting
What surface preparation is required before installing Brady BT-8807? Need Custom Engineering Validation for Brady BT-8807? Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.
