HomeB-Numbers DirectoryB-652
Sponsored Technical Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-top-B-652]
Brady B-652label_film_tape16 Orderable SKUs
Compare

Brady B-652: B-652 DOT MATRIX / LASER PRINTABLE HIGH TEMPERATURE POLYIMIDE LABEL

BRADY B-652 is a high temperature polyimide label with permanent acrylic adhesive, suitable for dot matrix and laser printing on printed circuit boards and electronic components.

Material Composition
Polyimide
Adhesive System
Permanent Acrylic
Operating Temperature
From -70°C
Total Thickness
—
Brady B-652 B-652 DOT MATRIX / LASER PRINTABLE HIGH TEMPERATURE POLYIMIDE LABEL industrial application photography
Figure 1: Brady B-652 — High-Temperature Polyimide PCB Tracking Film surviving 300°C SAC305 wave solder reflowField Application Photo
300°C SMT Reflow PCB

B-652 Application & Installation Blueprint

High-Temp SMT PCB & Circuit Board Label • Physical application tolerances and surface engineering
Industrial Fit Certified
B-652 real-world industrial application
Installed in real-world industrial environment
High-Temperature Surface Mount Placement
1Place label onto clean FR-4 board or electronic casing via automated SMT feeder or anti-static tweezers.
2Press firmly to activate permanent cross-linking acrylic adhesive.
3Passes through lead-free wave solder (500°F / 260°C) and multi-stage aqueous saponifier defluxing without degradation.
Engineering Tolerance: Survives 500°F (260°C) wave solder. Razor-sharp 600 DPI printing for micro 2D DataMatrix barcodes down to 0.125".
Substrate Compatibility & Adhesion Matrix
FR-4 Printed Circuit Boards
Extreme Bond (5/5)
Solder Mask & Copper Traces
Wave Proof (5/5)
Anodized Aluminum Housings
High Bond (4.8/5)
Ceramic Hybrid Substrates
High Bond (4.8/5)
Tested Environmental Survivability
500°F (260°C) SMT Wave SolderKyzen / Zestron DefluxersIsopropyl Alcohol 99%Electrostatic Discharge (ESD)
Recommended Field & Shop Tools:
i5100 600 DPI Precision PrinterAutomated Label Feeder (ALF)ESD Anti-Static Tweezers

Orderable Part Numbers, Packaging & Distributor SKUs

Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-652.

Popular B-652 Formats

Standard industrial rolls and die-cut sizes with unit cost breakdown
#1 Popular Choice
Standard Part
0.25 in H x 0.25 in W
Pack of 25 Cards
Roll / Pack Total:$178.99 USD
#2 Standard Format
Standard Part
0.25 in H x 0.3 in W
Pack of 12 Sheets
Roll / Pack Total:$907.99 USD
Normalized Unit Cost:$0.091/label
Material Area Cost:$1.21/sq in
Supported Hardware:
Laser Printers
#3 High Capacity
Standard Part
0.25 in H x 1 in W
Pack of 38 Sheets
Roll / Pack Total:$1379.00 USD
Normalized Unit Cost:$0.14/label
Material Area Cost:$0.55/sq in
Supported Hardware:
Laser Printers
All 16 Orderable Part Numbers
Pricing: $178.99 – $6719.00 USD
Catalog SKUDimensionsPackaging / QtyList Price & Unit CostOrder MOQCompatible PrintersHardware & Related
SL-11-PKPopular
UPC: 754473630355
0.25 in H x 0.25 in WPack of 25 Cards
$178.99 USD
1 PAK
Standard Order
UPC: 662820297017
0.25 in H x 0.3 in WPack of 12 Sheets
$907.99 USD
$0.091/label ($9.08/100)
$1.21/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297161
0.25 in H x 1 in WPack of 38 Sheets
$1379.00 USD
$0.14/label ($13.79/100)
$0.55/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297048
0.375 in H x 0.375 in WPack of 25 Sheets
$1269.00 USD
$0.13/label ($12.69/100)
$0.90/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297079
0.25 in H x 0.65 in WPack of 27 Sheets
$1009.00 USD
$0.10/label ($10.09/100)
$0.62/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297703
0.2 in H x 0.65 in WPack of 21 Sheets
$1009.00 USD
$0.10/label ($10.09/100)
$0.78/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297253
0.25 in H x 1.5 in WPack of 53 Sheets
$2509.00 USD
$0.25/label ($25.09/100)
$0.67/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297109
0.25 in H x 0.8 in WPack of 33 Sheets
$1309.00 USD
$0.13/label ($13.09/100)
$0.65/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297192
0.5 in H x 1 in WPack of 76 Sheets
$3299.00 USD
$0.33/label ($32.99/100)
$0.66/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297222
0.375 in H x 1 in WPack of 58 Sheets
$2209.00 USD
$0.22/label ($22.09/100)
$0.59/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297659
0.25 in H x 0.25 in WPack of 11 Sheets
$909.99 USD
$0.091/label ($9.10/100)
$1.46/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297642
0.437 in H x 0.437 in WPack of 35 Sheets
$1689.00 USD
$0.17/label ($16.89/100)
$0.88/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820142034
0.375 in H x 3 in WPack of 10000 Labels
$6719.00 USD
$0.67/label ($67.19/100)
$0.60/sq in
1 PAK
Standard Order
Dot Matrix Printers
UPC: 662820297284
0.25 in H x 1.875 in WPack of 65 Sheets
$3259.00 USD
$0.33/label ($32.59/100)
$0.70/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297130
0.5 in H x 0.8 in WPack of 66 Sheets
$3229.00 USD
$0.32/label ($32.29/100)
$0.81/sq in
1 PAK
Standard Order
Laser Printers
Showing 1 to 15 of 16 parts
Page 1 of 2

Quality Assurance, Storage & Regulatory Compliance

Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.

Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: Standard Industrial
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL Directory
CSA C22.2: Not certified
CSA Directory
Environmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Engineering Limitations & Chemical Fitness Warnings

Extracted directly from Brady Technical Data Sheets to prevent real-world application failures and chemical degradation:

  • not recommended for outdoor use
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-652]

ASTM Physical & Mechanical Properties

Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.

Physical PropertyTest MethodStandard Test Units (US)Metric Units (SI)

Thermal Transfer Ribbon Compatibility

Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.

Recommended Thermal Transfer
Series R5000
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.

Chemical & Solvent Resistance Matrix

Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.

Tested per ASTM D 895 / Brady standard dip & rub immersion.
Chemical Reagent / SolventSubstrate / Adhesive EffectThermal Ribbon Permanence
Kyzen Corp. 15% Aquanox® A4625 at 140°F (60°C)TestedTested
Kyzen Corp. 17% Aquanox® A4520 at 140°F (60°C)TestedTested
Kyzen Corp. 10% Aquanox® A4638 at 150°F (65°C)TestedTested
Kyzen Corp. 20% Aquanox®A4703 at 145°F (63°C)TestedTested
Zestron 15% Atron® AC205 at 150°F (65°C)TestedTested
Zestron 15% Atron® AC207 at 150°F (65°C)TestedTested
Zestron 15% Vigon A201 at 150°F (65°C)TestedTested
Zestron 15% Vigon N600 at 150°F (65°C)TestedTested
99% Isopropyl Alcohol at 180°F (82°C)TestedTested
Deionized water at 212°F (100°C)TestedTested
Aquanox® A4625TestedTested
Aquanox® A4520TestedTested
Aquanox® A4638TestedTested
Aquatex® A4703TestedTested
Atron® AC205TestedTested
Atron® AC207TestedTested
Vigon N600TestedTested
Isopropyl AlcoholTestedTested
Deionized waterTestedTested

Environmental & Aging Durability Testing

Environmental Exposure ConditionObservation & Legibility Result
652 DOT MATRIX / LASER PRINTABLE HIGH TEMPERATURE POLYIMIDE LABEL - Material Spec (Brady B-652) Material familyB-652
652 is a high temperature polyimide label with permanent acrylic adhesive, suitable for dot matrix and laser printing on printed circuit boards and electronic components. ## Verified specifications - Material typePolyimide
Service temperature (min)-70 °C

Verified Target Applications & Use Cases

  • Industrial rating plates, asset identification, and electrical component labeling.

Brady B-652 Frequently Asked Questions & Engineering Guide

Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-652.

Brady B-652 is a high-temperature polyimide film designed to withstand continuous exposure to SAC305 lead-free solder reflow profiles up to +300°C (+572°F) and harsh aqueous/saponifier circuit board defluxing washdowns without discoloration, shrinkage, or barcode read-rate loss.

Brady B-652 is rated for continuous service temperatures from standard industrial operating range. In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Need Custom Engineering Validation for Brady B-652?
Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.