How well does Brady B-2000 adhere to stainless steel, powder coat, and plastic surfaces?

Brady B-2000 uses a Permanent Acrylic adhesive. For optimum bond strength, surfaces should be cleaned with an isopropyl alcohol (IPA) wipe and allowed to dwell for 24 hours prior to full chemical or mechanical stress.

Which thermal transfer ribbons and Brady printers are compatible with B-2000?

The official manufacturer-recommended thermal transfer ribbon for Brady B-2000 is R4300. Using the recommended resin or hybrid ribbon ensures crisp edge definition, high-density 2D DataMatrix scanning, and compliance with abrasion rub standards. Compatible Brady printers include benchtop industrial systems (i3300, i5100, i7100, BBP33) as well as rugged portable field printers (M510, M610, and M710) depending on the SKU form factor.

How does Brady B-2000 withstand industrial chemicals, solvents, and fuels?

Brady B-2000 resists common industrial reagents including lubricating oils, water, mild acids, and aliphatic solvents.

Is Brady B-2000 UL Recognized, CSA Accepted, or Halogen-Free?

Brady B-2000 meets RoHS 2011/65/EU and REACH (SVHC) directives.

What are the critical engineering limitations and warnings for Brady B-2000?

Key limitations cited in the Brady Technical Data Sheet include: not recommended for use in harsh organic solvents such as methyl ethyl ketone, acetone, or 1,1,1-trichloroethane. To prevent failure, ensure the application substrate matches the recommended surface energy profiles and adhere to minimum application temperature requirements during installation.

Home B-Numbers DirectoryB-2000

Brady B-2000label_film_tape

Compare

Brady B-2000: B-2000 SMART WIRE IDENTIFICATION LABEL

Q: What are the primary industrial applications for Brady B-2000 (B-2000 SMART WIRE IDENTIFICATION LABEL)?

Brady B-2000 is a high-performance White Opaque Vinyl with NFC Inlay designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Permanent Acrylic engineered for long-term industrial reliability in environments requiring -80°C to 100°C (-112°F to 212°F) performance.

Q: What is the continuous operating temperature range for Brady B-2000?

Brady B-2000 is rated for continuous service temperatures from -80°C to 100°C (-112°F to 212°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

B-2000 SMART WIRE IDENTIFICATION LABEL is a white opaque vinyl label with NFC inlay, featuring permanent acrylic adhesive and thermal transfer print technology.

Material Composition

White Opaque Vinyl with NFC Inlay

Adhesive System

Permanent Acrylic

Operating Temperature

-80°C to 100°C (-112°F to 212°F)

Total Thickness

4 mils (0.102 mm)

Industrial Safety & Asset Marker

B-2000 Application & Installation Blueprint

Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering

Industrial Fit Certified

B-2000 real-world industrial application

Installed in real-world industrial environment

Standard Industrial Marking Procedure

1Ensure application surface is dry and free of loose particulate or heavy oil.

2Peel and apply with steady firm pressure from center to edge.

3Allow 24 hours for ultimate cross-linked adhesion strength.

Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.

Substrate Compatibility & Adhesion Matrix

Smooth Metals & Stainless Steel

Standard Bond (5/5)

Rigid Thermoplastics & ABS

Standard Bond (4.8/5)

Painted Metal Cabinets

Standard Bond (4.8/5)

Glass & Smooth Composite

Standard Bond (4.8/5)

Tested Environmental Survivability

Industrial Plant Temperature SwingsDust, Grease & Mild FluidsStandard Abrasion & RubbingLong-Term Legend Legibility

Recommended Field & Shop Tools:

i3300 / i5100 Benchtop PrinterM210 / M610 Handheld ToolStandard Thermal Ribbon

Orderable Part Numbers, Packaging & Distributor SKUs

Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-2000.

Custom orderable roll sizes, continuous tapes, and die-cut parts for B-2000 are available through authorized Brady distributors.

Quality Assurance, Storage & Regulatory Compliance

Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.

Shelf Life & Warehouse Storage

Expected Shelf Life: 1 Year from receipt

Storage Temperature: Below 80°F (27°C)

Relative Humidity: ≤ 60% RH

Must be stored in original packaging in a climate-controlled warehouse.

Application vs Service Limits

Min Application Temp: 50°F (10°C)

Service Temp Range: -80°C to 100°C (-112°F to 212°F)

Full Cure / Dwell Time: 24 Hours (ASTM D1000)

Clean surface of oil/grease before bonding for maximum peel strength.

Agency Testing & File Directories

UL 969 / 2238: Non-approved variant

UL Directory

CSA C22.2: Not certified

CSA Directory

Environmental & Safety Standards

RoHS 3 Compliance:2011/65/EU (Pass 2015/863)

REACH Status:SVHC Free (<0.1% w/w)

CA Prop 65:Compliant Notice

Certificates of Conformance (CoC) available on order shipment.

Engineering Limitations & Chemical Fitness Warnings

Extracted directly from Brady Technical Data Sheets to prevent real-world application failures and chemical degradation:

not recommended for use in harsh organic solvents such as methyl ethyl ketone, acetone, or 1,1,1-trichloroethane

ASTM Physical & Mechanical Properties

Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.

Physical Property	Test Method	Standard Test Units (US)	Metric Units (SI)
Total Thickness	ASTM D 1000	4 mils (0.004 in)	0.102 mm
Flammability (ABT)	ASTM D 1000	< 10 Seconds	Self-extinguishing

Thermal Transfer Ribbon Compatibility

Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.

Recommended Thermal Transfer

Series R4300

* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.

Chemical & Solvent Resistance Matrix

Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.

Tested per ASTM D 895 / Brady standard dip & rub immersion.

Chemical Reagent / Solvent	Substrate / Adhesive Effect	Thermal Ribbon Permanence
Isopropyl Alcohol (reagent); No visible effect (observation); Functional (nfc_function)	Tested	Tested
Mineral Spirits (reagent); No visible effect (observation); Functional (nfc_function)	Tested	Tested
Northwoods TM Buzz Saw Terpene Cleaner (reagent); Slight Smear/Pilling (observation); Functional (nfc_function)	Tested	Tested
Formula 409® (reagent); No visible effect (observation); Functional (nfc_function)	Tested	Tested
Deionized Water (reagent); No visible effect (observation); Functional (nfc_function)	Tested	Tested
Yellow 77® Wire Pulling Lubricant (reagent); No visible effect (observation); Functional (nfc_function)	Tested	Tested
Isopropyl Alcohol	Tested	Tested
Mineral Spirits	Tested	Tested
Northwoods TM Buzz Saw Terpene Cleaner	Tested	Tested
Formula 409®	Tested	Tested
Deionized Water	Tested	Tested
Yellow 77® Wire Pulling Lubricant	Tested	Tested

Environmental & Aging Durability Testing

Environmental Exposure Condition	Observation & Legibility Result
Service temperature	-80 to 100 °C

Verified Target Applications & Use Cases

Industrial rating plates, asset identification, and electrical component labeling.

Brady B-2000 Frequently Asked Questions & Engineering Guide

Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-2000.

Brady B-2000 is a high-performance White Opaque Vinyl with NFC Inlay designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Permanent Acrylic engineered for long-term industrial reliability in environments requiring -80°C to 100°C (-112°F to 212°F) performance.

Brady B-2000 is rated for continuous service temperatures from -80°C to 100°C (-112°F to 212°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Need Custom Engineering Validation for Brady B-2000?

Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.

Ribbon Matcher Compare B-2000