How well does Brady B-235 adhere to stainless steel, powder coat, and plastic surfaces?

Brady B-235 uses a Pressure sensitive acrylic adhesive. For optimum bond strength, surfaces should be cleaned with an isopropyl alcohol (IPA) wipe and allowed to dwell for 24 hours prior to full chemical or mechanical stress.

Which thermal transfer ribbons and Brady printers are compatible with B-235?

The official manufacturer-recommended thermal transfer ribbon for Brady B-235 is Brady Series R4300, R6000 Halogen-Free, or R6200 resin ribbons. Using the recommended resin or hybrid ribbon ensures crisp edge definition, high-density 2D DataMatrix scanning, and compliance with abrasion rub standards. Compatible Brady printers include benchtop industrial systems (i3300, i5100, i7100, BBP33) as well as rugged portable field printers (M510, M610, and M710) depending on the SKU form factor.

How does Brady B-235 withstand industrial chemicals, solvents, and fuels?

Brady B-235 resists common industrial reagents including lubricating oils, water, mild acids, and aliphatic solvents.

Is Brady B-235 UL Recognized, CSA Accepted, or Halogen-Free?

Brady B-235 meets RoHS 2011/65/EU and REACH (SVHC) directives.

What are the critical engineering limitations and warnings for Brady B-235?

Key limitations cited in the Brady Technical Data Sheet include: Not recommended for outdoor use; Not recommended for chemical exposure. To prevent failure, ensure the application substrate matches the recommended surface energy profiles and adhere to minimum application temperature requirements during installation.

Home B-Numbers DirectoryB-235

Brady B-235label_film_tape65 Orderable SKUs

Compare

Brady B-235: B-235 PAPER LABEL STOCK

Q: What are the primary industrial applications for Brady B-235 (B-235 PAPER LABEL STOCK)?

Brady B-235 is a high-performance paper designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Pressure sensitive acrylic engineered for long-term industrial reliability in environments requiring -40°C to 65°C (-40°F to 149°F) performance.

Q: What is the continuous operating temperature range for Brady B-235?

Brady B-235 is rated for continuous service temperatures from -40°C to 65°C (-40°F to 149°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Brady B-235 is a surface printed paper label stock with pressure sensitive acrylic adhesive, suitable for general labeling applications.

Material Composition

paper

Adhesive System

Pressure sensitive acrylic

Operating Temperature

-40°C to 65°C (-40°F to 149°F)

Total Thickness

3.8 mils (0.097 mm)

Industrial Safety & Asset Marker

B-235 Application & Installation Blueprint

Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering

Industrial Fit Certified

Installed in real-world industrial environment

Standard Industrial Marking Procedure

1Ensure application surface is dry and free of loose particulate or heavy oil.

2Peel and apply with steady firm pressure from center to edge.

3Allow 24 hours for ultimate cross-linked adhesion strength.

Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.

Substrate Compatibility & Adhesion Matrix

Smooth Metals & Stainless Steel

Standard Bond (5/5)

Rigid Thermoplastics & ABS

Standard Bond (4.8/5)

Painted Metal Cabinets

Standard Bond (4.8/5)

Glass & Smooth Composite

Standard Bond (4.8/5)

Tested Environmental Survivability

Industrial Plant Temperature SwingsDust, Grease & Mild FluidsStandard Abrasion & RubbingLong-Term Legend Legibility

Recommended Field & Shop Tools:

i3300 / i5100 Benchtop PrinterM210 / M610 Handheld ToolStandard Thermal Ribbon

Orderable Part Numbers, Packaging & Distributor SKUs

Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-235.

Popular B-235 Formats

Standard industrial rolls and die-cut sizes with unit cost breakdown

#1 Popular Choice

Standard Part

53071

6 in H x 6 in W

Roll of 500 Labels

Roll / Pack Total:$337.99 USD

Normalized Unit Cost:$0.68/label

Material Area Cost:$0.02/sq in

Grainger

#2 Standard Format

Standard Part

60322

3.875 in H x 3.875 in W

Roll of 500 Labels

Roll / Pack Total:$337.99 USD

Normalized Unit Cost:$0.68/label

Material Area Cost:$0.05/sq in

Grainger

#3 High Capacity

Standard Part

53069

4 in H x 4 in W

Roll of 500 Labels

Roll / Pack Total:$263.99 USD

Normalized Unit Cost:$0.53/label

Material Area Cost:$0.03/sq in

Grainger

All 65 Orderable Part Numbers

Pricing: $8.59 – $337.99 USD

Catalog SKU	Dimensions	Packaging / Qty	List Price & Unit Cost	Order MOQ
53071 UPC: 754473530716	6 in H x 6 in W	Roll of 500 Labels	$337.99 USD $0.68/label ($67.60/100) $0.02/sq in	1 ROL Standard Order
60322 UPC: 754473603229	3.875 in H x 3.875 in W	Roll of 500 Labels	$337.99 USD $0.68/label ($67.60/100) $0.05/sq in	1 ROL Standard Order
53069 UPC: 754473530693	4 in H x 4 in W	Roll of 500 Labels	$263.99 USD $0.53/label ($52.80/100) $0.03/sq in	1 ROL Standard Order
92304 UPC: 754473923044	5 in H x 2 in W	Roll of 500 Labels	$223.99 USD $0.45/label ($44.80/100) $0.04/sq in	1 ROL Standard Order
53067 UPC: 754473530679	2 in H x 2 in W	Roll of 500 Labels	$163.99 USD $0.33/label ($32.80/100) $0.08/sq in	1 ROL Standard Order
99177 UPC: 754473991777	8 in H x 3 in W	Roll of 500 Labels	$138.99 USD $0.28/label ($27.80/100) $0.01/sq in	1 ROL Standard Order
99197 UPC: 754473991975	8 in H x 3 in W	Roll of 500 Labels	$137.99 USD $0.28/label ($27.60/100) $0.01/sq in	1 ROL Standard Order
58264 UPC: 754473582647	8 in H x 3 in W	Roll of 500 Labels	$134.99 USD $0.27/label ($27.00/100) $0.01/sq in	1 EA Standard Order
102844 UPC: 754473015077	1 in H x 3 in W	Roll of 720 Labels	$127.99 USD $0.18/label ($17.78/100) $0.06/sq in	1 ROL Standard Order
60329 UPC: 754473603298	5.875 in H x 4 in W	Pack of 100 Labels	$107.99 USD $1.08/label ($107.99/100) $0.05/sq in	1 PAK Standard Order
99195 UPC: 754473991951	5 in H x 3 in W	Roll of 500 Labels	$92.99 USD $0.19/label ($18.60/100) $0.01/sq in	1 ROL Standard Order
99175 UPC: 754473991753	5 in H x 3 in W	Roll of 500 Labels	$92.99 USD $0.19/label ($18.60/100) $0.01/sq in	1 ROL Standard Order
60325 UPC: 754473603250	1.5 in H x 3.875 in W	Roll of 1000 Labels	$85.99 USD $0.086/label ($8.60/100) $0.01/sq in	1 ROL Standard Order
60337 UPC: 754473603373	10 in H x 7 in W	Pack of 100 Labels	$79.99 USD $0.80/label ($79.99/100) $0.01/sq in	1 PAK Standard Order
60336 UPC: 754473603366	6 in H x 6 in W	Pack of 100 Labels	$61.99 USD $0.62/label ($61.99/100) $0.02/sq in	1 PAK Standard Order

Showing 1 to 15 of 65 parts

Page 1 of 5

Quality Assurance, Storage & Regulatory Compliance

Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.

Shelf Life & Warehouse Storage

Expected Shelf Life: 1 Year from receipt

Storage Temperature: Below 80°F (27°C)

Relative Humidity: ≤ 60% RH

Must be stored in original packaging in a climate-controlled warehouse.

Application vs Service Limits

Min Application Temp: 50°F (10°C)

Service Temp Range: -40°C to 65°C (-40°F to 149°F)

Full Cure / Dwell Time: 24 Hours (ASTM D1000)

Clean surface of oil/grease before bonding for maximum peel strength.

Agency Testing & File Directories

UL 969 / 2238: Non-approved variant

UL Directory

CSA C22.2: Not certified

CSA Directory

Environmental & Safety Standards

RoHS 3 Compliance:2011/65/EU (Pass 2015/863)

REACH Status:SVHC Free (<0.1% w/w)

CA Prop 65:Compliant Notice

Certificates of Conformance (CoC) available on order shipment.

Engineering Limitations & Chemical Fitness Warnings

Extracted directly from Brady Technical Data Sheets to prevent real-world application failures and chemical degradation:

Not recommended for outdoor use
Not recommended for chemical exposure

ASTM Physical & Mechanical Properties

Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.

Physical Property	Test Method	Standard Test Units (US)	Metric Units (SI)
Total Thickness	ASTM D 1000	3.8 mils (0.004 in)	0.097 mm

Thermal Transfer Ribbon Compatibility

Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.

Recommended Thermal Transfer

Non-printable hardware, tag, or pre-printed material.

* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.

Chemical & Solvent Resistance Matrix

Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.

Tested per ASTM D 895 / Brady standard dip & rub immersion.

Chemical Reagent / Solvent	Substrate / Adhesive Effect	Thermal Ribbon Permanence
Not recommended for chemical exposure.	Tested	Tested

Environmental & Aging Durability Testing

Environmental Exposure Condition	Observation & Legibility Result
Service temperature	-40 to 65 °C

Verified Target Applications & Use Cases

Industrial rating plates, asset identification, and electrical component labeling.

Brady B-235 Frequently Asked Questions & Engineering Guide

Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-235.

Brady B-235 is a high-performance paper designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Pressure sensitive acrylic engineered for long-term industrial reliability in environments requiring -40°C to 65°C (-40°F to 149°F) performance.

Brady B-235 is rated for continuous service temperatures from -40°C to 65°C (-40°F to 149°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Need Custom Engineering Validation for Brady B-235?

Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.

Ribbon Matcher Compare B-235