How well does Brady B-3 adhere to stainless steel, powder coat, and plastic surfaces?

Brady B-3 uses a Permanent acrylic pressure-sensitive adhesive adhesive. According to ASTM D 1000 laboratory testing, it exhibits 80 oz/in (87.5 N/100mm) peel adhesion to stainless steel after a 15 Minute Dwell. On textured powder-coated steel, it achieves 60 oz/in of peel force. For optimum bond strength, surfaces should be cleaned with an isopropyl alcohol (IPA) wipe and allowed to dwell for 24 hours prior to full chemical or mechanical stress.

Which thermal transfer ribbons and Brady printers are compatible with B-3?

The official manufacturer-recommended thermal transfer ribbon for Brady B-3 is Brady Series R4300, R6000 Halogen-Free, or R6200 resin ribbons. Using the recommended resin or hybrid ribbon ensures crisp edge definition, high-density 2D DataMatrix scanning, and compliance with abrasion rub standards. Compatible Brady printers include benchtop industrial systems (i3300, i5100, i7100, BBP33) as well as rugged portable field printers (M510, M610, and M710) depending on the SKU form factor.

How does Brady B-3 withstand industrial chemicals, solvents, and fuels?

Brady B-3 resists common industrial reagents including lubricating oils, water, mild acids, and aliphatic solvents.

Is Brady B-3 UL Recognized, CSA Accepted, or Halogen-Free?

Brady B-3 meets RoHS 2011/65/EU and REACH (SVHC) directives.

What are the critical engineering limitations and warnings for Brady B-3?

Key limitations cited in the Brady Technical Data Sheet include: not recommended for outdoor use; Not recommended for outdoor use. To prevent failure, ensure the application substrate matches the recommended surface energy profiles and adhere to minimum application temperature requirements during installation.

Home B-Numbers DirectoryB-3

Brady B-3label_film_tape

Compare

Brady B-3: Floor Marking Tape

Q: What are the primary industrial applications for Brady B-3 (Floor Marking Tape)?

Brady B-3 is a high-performance vinyl designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Permanent acrylic pressure-sensitive adhesive engineered for long-term industrial reliability in environments requiring -40°C to 82°C (-40°F to 180°F) performance.

Q: What is the continuous operating temperature range for Brady B-3?

Brady B-3 is rated for continuous service temperatures from -40°C to 82°C (-40°F to 180°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Brady B-3 is a vinyl floor marking tape with good durability and adhesive properties, suitable for indoor use in areas with typical foot traffic.

Material Composition

vinyl

Adhesive System

Permanent acrylic pressure-sensitive adhesive

Operating Temperature

-40°C to 82°C (-40°F to 180°F)

Total Thickness

4 mils (0.102 mm)

Industrial Safety & Asset Marker

B-3 Application & Installation Blueprint

Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering

Industrial Fit Certified

Installed in real-world industrial environment

Standard Industrial Marking Procedure

1Ensure application surface is dry and free of loose particulate or heavy oil.

2Peel and apply with steady firm pressure from center to edge.

3Allow 24 hours for ultimate cross-linked adhesion strength.

Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.

Substrate Compatibility & Adhesion Matrix

Smooth Metals & Stainless Steel

Standard Bond (5/5)

Rigid Thermoplastics & ABS

Standard Bond (4.8/5)

Painted Metal Cabinets

Standard Bond (4.8/5)

Glass & Smooth Composite

Standard Bond (4.8/5)

Tested Environmental Survivability

Industrial Plant Temperature SwingsDust, Grease & Mild FluidsStandard Abrasion & RubbingLong-Term Legend Legibility

Recommended Field & Shop Tools:

i3300 / i5100 Benchtop PrinterM210 / M610 Handheld ToolStandard Thermal Ribbon

Orderable Part Numbers, Packaging & Distributor SKUs

Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-3.

Custom orderable roll sizes, continuous tapes, and die-cut parts for B-3 are available through authorized Brady distributors.

Quality Assurance, Storage & Regulatory Compliance

Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.

Shelf Life & Warehouse Storage

Expected Shelf Life: 1 Year from receipt

Storage Temperature: Below 80°F (27°C)

Relative Humidity: ≤ 60% RH

Must be stored in original packaging in a climate-controlled warehouse.

Application vs Service Limits

Min Application Temp: 50°F (10°C)

Service Temp Range: -40°C to 82°C (-40°F to 180°F)

Full Cure / Dwell Time: 24 Hours (ASTM D1000)

Clean surface of oil/grease before bonding for maximum peel strength.

Agency Testing & File Directories

UL 969 / 2238: Non-approved variant

UL Directory

CSA C22.2: Not certified

CSA Directory

Environmental & Safety Standards

RoHS 3 Compliance:2011/65/EU (Pass 2015/863)

REACH Status:SVHC Free (<0.1% w/w)

CA Prop 65:Compliant Notice

Certificates of Conformance (CoC) available on order shipment.

Engineering Limitations & Chemical Fitness Warnings

Extracted directly from Brady Technical Data Sheets to prevent real-world application failures and chemical degradation:

not recommended for outdoor use
Not recommended for outdoor use

ASTM Physical & Mechanical Properties

Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.

Physical Property	Test Method	Standard Test Units (US)	Metric Units (SI)
Total Thickness	ASTM D 1000	4 mils (0.004 in)	0.102 mm
Adhesion to Steel (15 Minute Dwell)	PSTC-101	80 oz/in	87.5 N/100mm
Adhesion to Powder Coated Metal (15 Minute Dwell)	PSTC-101	60 oz/in	65 N/100mm
Adhesion to Polypropylene (15 Minute Dwell)	PSTC-101	60 oz/in	65 N/100mm
Adhesion to Textured ABS (15 Minute Dwell)	PSTC-101	37 oz/in	40 N/100mm
Adhesion to Glass (15 Minute Dwell)	PSTC-101	82 oz/in	90 N/100mm

Thermal Transfer Ribbon Compatibility

Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.

Recommended Thermal Transfer

Non-printable hardware, tag, or pre-printed material.

* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.

Chemical & Solvent Resistance Matrix

Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.

Tested per ASTM D 895 / Brady standard dip & rub immersion.

Chemical Reagent / Solvent	Substrate / Adhesive Effect	Thermal Ribbon Permanence
30% Sulfuric Acid	Tested	Tested
10% Sulfuric Acid	Tested	Tested
30% Hydrochloric Acid	Tested	Tested
10% Hydrochloric Acid	Tested	Tested
Glacial Acetic Acid	Tested	Tested
5% Acetic Acid	Tested	Tested
50% Sodium Hydroxide	Tested	Tested
10% Sodium Hydroxide	Tested	Tested
10% Ammonia	Tested	Tested
5% Sodium Hypochlorite	Tested	Tested
10% Sodium Chloride	Tested	Tested
Isopropyl Alcohol	Tested	Tested
Mineral Spirits	Tested	Tested
Diesel Fuel	Tested	Tested
ASTM #3 Oil	Tested	Tested
SAE 20 Oil	Tested	Tested
Alconox®	Tested	Tested

Environmental & Aging Durability Testing

Environmental Exposure Condition	Observation & Legibility Result
Service temperature	-40 to 82 °C

Verified Target Applications & Use Cases

Industrial rating plates, asset identification, and electrical component labeling.

Brady B-3 Frequently Asked Questions & Engineering Guide

Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-3.

Brady B-3 is a high-performance vinyl designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Permanent acrylic pressure-sensitive adhesive engineered for long-term industrial reliability in environments requiring -40°C to 82°C (-40°F to 180°F) performance.

Brady B-3 is rated for continuous service temperatures from -40°C to 82°C (-40°F to 180°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Need Custom Engineering Validation for Brady B-3?

Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.

Ribbon Matcher Compare B-3