Sponsored Technical Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-top-B-410]
Brady B-410label_film_tape4 Orderable SKUs
Brady B-410: B-410
B-410 is a tamper-evident polyolefin material with permanent acrylic adhesive, suitable for laser and dot matrix printing.
Material Composition
TamperEvidentPolyolefinFinish:MatteAdhesive:PermanentAcrylic
Adhesive System
PermanentAcrylic
Operating Temperature
-94°C to 100°C (-137°F to 212°F)
Total Thickness
—
Tamper-Evident Security
B-410 Application & Installation Blueprint
Tamper-Evident & Security Void Warranty Seal • Physical application tolerances and surface engineering
Industrial Fit Certified
Security Seal & Warranty Tamper Application
1Apply across access screws, enclosure parting lines, or calibration ports on clean dry surfaces.
2Allow 24 hours for full acrylic cross-linking bond.
3Any removal attempt causes irreversible facestock fracturing or leaves a bold "VOID" footprint on substrate.
Engineering Tolerance: Irreversible optical tamper indication prevents unauthorized warranty claims or undetected enclosure access.
Substrate Compatibility & Adhesion Matrix
Anodized Aluminum Instrument Cases
Instant Tamper (5/5)
Calibrated Metrology Equipment
Instant Tamper (5/5)
Polycarbonate Enclosure Seams
Instant Tamper (5/5)
Powder-Coated Access Panels
Instant Tamper (4.8/5)
Tested Environmental Survivability
Anti-Peel Transfer ResistanceSolvent & Oil Wipe ProofThermal Shock ResistancePermanent Void Footprint
Recommended Field & Shop Tools:
i3300 / i5100 Benchtop PrinterM610 Handheld ToolR6000 Halogen-Free Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-410.
Popular B-410 Formats
Standard industrial rolls and die-cut sizes with unit cost breakdown#1 Popular Choice
Standard Part
0.25 in H x 0.65 in W
Pack of 10000 Each
Roll / Pack Total:$396.99 USD
Normalized Unit Cost:$0.040/label
Material Area Cost:$0.24/sq in
Supported Hardware:
Laser Printers
#2 Standard Format
Standard Part
0.25 in H x 0.8 in W
Pack of 10000 Each
Roll / Pack Total:$462.99 USD
Normalized Unit Cost:$0.046/label
Material Area Cost:$0.23/sq in
Supported Hardware:
Laser Printers
#3 High Capacity
Standard Part
0.5 in H x 1 in W
Pack of 10000 Each
Roll / Pack Total:$996.99 USD
Normalized Unit Cost:$0.100/label
Material Area Cost:$0.20/sq in
Supported Hardware:
Laser Printers
All 4 Orderable Part Numbers
Pricing: $396.99 – $996.99 USD
| Catalog SKU | Dimensions | Packaging / Qty | List Price & Unit Cost | Order MOQ | Compatible Printers | Hardware & Related |
|---|---|---|---|---|---|---|
UPC: 662820297598 | 0.25 in H x 0.65 in W | Pack of 10000 Each | $396.99 USD $0.040/label ($3.97/100) $0.24/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820297604 | 0.25 in H x 0.8 in W | Pack of 10000 Each | $462.99 USD $0.046/label ($4.63/100) $0.23/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820297611 | 0.5 in H x 1 in W | Pack of 10000 Each | $996.99 USD $0.100/label ($9.97/100) $0.20/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820245681 | 0.833 in H x 1.875 in W | Pack of 57 Sheets | $397.99 USD $0.16/label ($15.92/100) $0.10/sq in | 1 PAK Standard Order | Laser Printers |
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: -94°C to 100°C (-137°F to 212°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryEnvironmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-410]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| 3% Alconox® Detergent | Tested | Tested |
| Northwoods™ BuzzSaw | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| Service temperature | -94 to 100 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.
Brady B-410 Frequently Asked Questions & Engineering Guide
Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-410.
Need Custom Engineering Validation for Brady B-410?
Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.