How well does Brady B-489A adhere to stainless steel, powder coat, and plastic surfaces?

Brady B-489A uses a Permanent rubber based adhesive. For optimum bond strength, surfaces should be cleaned with an isopropyl alcohol (IPA) wipe and allowed to dwell for 24 hours prior to full chemical or mechanical stress.

Which thermal transfer ribbons and Brady printers are compatible with B-489A?

The official manufacturer-recommended thermal transfer ribbon for Brady B-489A is R4300. Using the recommended resin or hybrid ribbon ensures crisp edge definition, high-density 2D DataMatrix scanning, and compliance with abrasion rub standards. Compatible Brady printers include benchtop industrial systems (i3300, i5100, i7100, BBP33) as well as rugged portable field printers (M510, M610, and M710) depending on the SKU form factor.

How does Brady B-489A withstand industrial chemicals, solvents, and fuels?

Brady B-489A resists common industrial reagents including lubricating oils, water, mild acids, and aliphatic solvents.

Is Brady B-489A UL Recognized, CSA Accepted, or Halogen-Free?

Brady B-489A meets RoHS 2011/65/EU and REACH (SVHC) directives. It is a UL Recognized Component under standard(s) UL 969, UL 969L with File Number(s) MH17154. It is CSA Accepted under Standard C22.2 No. 0.15 (File 041833).

What surface preparation is required before installing Brady B-489A?

To achieve maximum bond strength, ensure the bonding substrate is clean, dry, and free of machining oils, silicone mold release agents, or dust. Wipe the surface with a 50/50 Isopropyl Alcohol (IPA) and water solution using a lint-free wipe, allow to evaporate completely, and apply firm, uniform roller or thumb pressure across the entire label face.

Home B-Numbers DirectoryB-489A

Brady B-489Alabel_film_tape40 Orderable SKUs

Compare

Brady B-489A: B-489A THERMAL TRANSFER PRINTABLE LABEL STOCK

Q: Why is Brady B-489A recommended for powder-coated steel and textured surfaces?

Brady B-489A is engineered with an ultra-aggressive, high-tack rubber-modified acrylic adhesive system that delivers over 100 oz/inch of peel adhesion on low surface energy (LSE) plastics and textured powder-coated machine frames (28–32 dynes/cm). The thick adhesive layer flows into micro-valleys on rough surfaces, eliminating edge lifting that causes standard labels to fail.

Q: What is the continuous operating temperature range for Brady B-489A?

Brady B-489A is rated for continuous service temperatures from -40°C to 120°C (-40°F to 248°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

B-489A is a thermal transfer printable label stock made of polyester with permanent rubber-based adhesive, designed for high adhesion to textured metals and low surface energy plastics.

Material Composition

PolyesterFinish:MatteAdhesive:Permanent rubber based

Adhesive System

Permanent rubber based

Operating Temperature

-40°C to 120°C (-40°F to 248°F)

Total Thickness

—

Brady B-489A B-489A THERMAL TRANSFER PRINTABLE LABEL STOCK industrial application photography

Figure 1: Brady B-489A — Ultra-Aggressive Matte White High-Tack Polyester on powder-coated electrical control cabinetsField Application Photo

High-Tack Powder-Coat Grip

B-489A Application & Installation Blueprint

Ultra-Aggressive High-Tack Industrial Asset Plate • Physical application tolerances and surface engineering

Industrial Fit Certified

B-489A real-world industrial application

Installed in real-world industrial environment

Textured & Low-Surface-Energy Bonding Guide

1Wipe cast or powder-coated surface to remove loose dust or machining oils.

2Apply polyester plate with firm thumb pressure across the entire label area.

3Heavy-weight rubber/acrylic hybrid adhesive flows into microscopic textured valleys for permanent mechanical bond.

Engineering Tolerance: Exceeds 100 oz/in peel adhesion on low-surface-energy (LSE) polypropylene and hammer-tone textured powder coats.

Substrate Compatibility & Adhesion Matrix

Textured Powder-Coated Steel

Ultra Bond (5/5)

Molded Polypropylene & HDPE

LSE Grip (5/5)

Cast Iron & Rough Castings

Crevice Flow (4.9/5)

Outdoor Heavy Equipment Chassis

High Tack (5/5)

Tested Environmental Survivability

Textured Surface Crevice GripOutdoor WeatheringGrease, Gasoline & DieselHigh Vibration Machinery

Recommended Field & Shop Tools:

i3300 / i5100 Benchtop PrinterM710 Heavy-Duty PortableR6000 High-Resin Ribbon

Orderable Part Numbers, Packaging & Distributor SKUs

Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-489A.

Popular B-489A Formats

Standard industrial rolls and die-cut sizes with unit cost breakdown

#1 Popular Choice

Standard Part

B30C-4000-489

4 in W x 130 ft L

Cartridge of 130 Feet

Roll / Pack Total:$217.99 USD

Normalized Unit Cost:$1.68/ft

Material Area Cost:$0.03/sq in

Supported Hardware:

BBP35BBP37i3300+5

Grainger

#2 Standard Format

Standard Part

THT-18-489-3

1 in H x 3 in W

Roll of 3000 Labels

Roll / Pack Total:$350.99 USD

Normalized Unit Cost:$0.12/label

Material Area Cost:$0.04/sq in

Supported Hardware:

BBP81i5100i6100+5

Grainger

#3 High Capacity

Standard Part

THT-17-489-3

1 in H x 2 in W

Roll of 3000 Labels

Roll / Pack Total:$263.99 USD

Normalized Unit Cost:$0.088/label

Material Area Cost:$0.04/sq in

Supported Hardware:

BBP81i5100i6100+5

Grainger

All 40 Orderable Part Numbers

Pricing: $45.69 – $466.99 USD

Catalog SKU	Dimensions	Packaging / Qty	List Price & Unit Cost	Order MOQ	Compatible Printers
B30C-4000-489Popular UPC: 754473951016	4 in W x 130 ft L	Cartridge of 130 Feet	$217.99 USD $1.68/ft ($0.14/in) $0.03/sq in	1 ROL Standard Order	BBP35BBP37+6
THT-18-489-3Popular UPC: 662820671022	1 in H x 3 in W	Roll of 3000 Labels	$350.99 USD $0.12/label ($11.70/100) $0.04/sq in	1 ROL Standard Order	BBP81i5100+6
THT-17-489-3Popular UPC: 662820671015	1 in H x 2 in W	Roll of 3000 Labels	$263.99 USD $0.088/label ($8.80/100) $0.04/sq in	1 ROL Standard Order	BBP81i5100+6
THT-37-489-10Popular UPC: 662820671053	0.5 in H x 1.5 in W	Roll of 10000 Labels	$364.99 USD $0.036/label ($3.65/100) $0.05/sq in	1 ROL Standard Order	BBP81i5100+6
THT-55-489-1Popular UPC: 662820671060	2 in H x 4 in W	Roll of 1000 Labels	$298.99 USD $0.30/label ($29.90/100) $0.04/sq in	1 ROL Standard Order	BBP81i5100+6
THT-76-489-1Popular UPC: 662820671084	3 in H x 4 in W	Roll of 1000 Labels	$466.99 USD $0.47/label ($46.70/100) $0.04/sq in	1 ROL Standard Order	BBP81i5100+6
THT-19-489-1Popular UPC: 662820671039	2 in H x 3 in W	Roll of 1000 Labels	$234.99 USD $0.23/label ($23.50/100) $0.04/sq in	1 ROL Standard Order	BBP81i5100+6
THT-7-489-3Popular UPC: 662820671008	1.25 in H x 2.75 in W	Roll of 3000 Labels	$401.99 USD $0.13/label ($13.40/100) $0.04/sq in	1 ROL Standard Order	BBP81i5100+6
B33-5-489Popular UPC: 662820969020	0.5 in H x 1 in W	Cartridge of 5000 Labels	$136.99 USD $0.027/label ($2.74/100) $0.05/sq in	1 ROL Standard Order	BBP33i3300+2
M6-31-489Popular UPC: 888434597477	1 in H x 1.5 in W	Roll of 250 Labels	$64.99 USD $0.26/label ($26.00/100) $0.17/sq in	1 ROL Standard Order	M610M611+1
THT-21-489 UPC: 662820671046	3 in W x 300 ft L	Roll of 300 Feet	$367.99 USD $1.23/ft ($0.10/in) $0.03/sq in	1 ROL Standard Order	BBP81i5100+6
M6-17-489Popular UPC: 888434596494	0.5 in H x 1 in W	Roll of 500 Labels	$83.99 USD $0.17/label ($16.80/100) $0.34/sq in	1 ROL Standard Order	M610M611+1
M6-29-489Popular UPC: 888434600788	0.5 in H x 1.5 in W	Roll of 500 Labels	$93.99 USD $0.19/label ($18.80/100) $0.25/sq in	1 ROL Standard Order	M610M611+1
THT-5-489-10Popular UPC: 662820670995	0.5 in H x 1 in W	Roll of 10000 Labels	$277.99 USD $0.028/label ($2.78/100) $0.06/sq in	1 ROL Standard Order	BBP81i5100+6
M6-19-489Popular UPC: 888434596623	1 in H x 1 in W	Roll of 250 Labels	$57.99 USD $0.23/label ($23.20/100) $0.23/sq in	1 ROL Standard Order	M610M611+1

Showing 1 to 15 of 40 parts

Page 1 of 3

Quality Assurance, Storage & Regulatory Compliance

Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.

Shelf Life & Warehouse Storage

Expected Shelf Life: 2 Years from receipt

Storage Temperature: Below 80°F (27°C)

Relative Humidity: ≤ 60% RH

Must be stored in original packaging in a climate-controlled warehouse.

Application vs Service Limits

Min Application Temp: 50°F (10°C)

Service Temp Range: -40°C to 120°C (-40°F to 248°F)

Full Cure / Dwell Time: 24 Hours (ASTM D1000)

Clean surface of oil/grease before bonding for maximum peel strength.

Agency Testing & File Directories

UL 969 / 2238: MH17154

UL Directory

CSA C22.2: 041833

CSA Directory

Environmental & Safety Standards

RoHS 3 Compliance:2011/65/EU (Pass 2015/863)

REACH Status:SVHC Free (<0.1% w/w)

CA Prop 65:Compliant Notice

Certificates of Conformance (CoC) available on order shipment.

ASTM Physical & Mechanical Properties

Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.

Physical Property	Test Method	Standard Test Units (US)	Metric Units (SI)

Thermal Transfer Ribbon Compatibility

Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.

Recommended Thermal Transfer

Series R4300

* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.

Chemical & Solvent Resistance Matrix

Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.

Tested per ASTM D 895 / Brady standard dip & rub immersion.

Chemical Reagent / Solvent	Substrate / Adhesive Effect	Thermal Ribbon Permanence
Methyl Ethyl Ketone	Slight adhesive ooze	Slight adhesive ooze
Toluene	No visible effect	No visible effect
Isopropyl Alcohol	No visible effect	No visible effect
Mineral Spirits	Slight adhesive ooze	Slight adhesive ooze
JP-8 Jet Fuel	No visible effect	No visible effect
ASTM Reference Fuel B	No visible effect	No visible effect
ASTM #3 Oil	Slight adhesive ooze	Slight adhesive ooze
Mil 5606 Oil	No visible effect	No visible effect
Skydrol® 500B-4	Slight adhesive ooze	Slight adhesive ooze
Super Agitene®	No visible effect	No visible effect
Deionized Water	No visible effect	No visible effect
3% Alconox® Detergent	No visible effect	No visible effect
10% Sodium Hydroxide Solution	No visible effect	No visible effect
10% Sulfuric Acid Solution	No visible effect	No visible effect
Methyl Ethyl Ketone	Tested	Tested
Toluene	Tested	Tested
Isopropyl Alcohol	Tested	Tested
Mineral Spirits	Tested	Tested
JP-8 Jet Fuel	Tested	Tested
ASTM Reference Fuel B	Tested	Tested
ASTM #3 Oil	Tested	Tested
Mil 5606 Oil	Tested	Tested
Skydrol® 500B-4	Tested	Tested
Super Agitene®	Tested	Tested
Deionized Water	Tested	Tested
3% Alconox® Detergent	Tested	Tested
10% Sodium Hydroxide Solution	Tested	Tested
10% Sulfuric Acid Solution	Tested	Tested

Environmental & Aging Durability Testing

Environmental Exposure Condition	Observation & Legibility Result
489A THERMAL TRANSFER PRINTABLE LABEL STOCK - Material Spec (Brady B-489A) Material family	B-489A
489A is a thermal transfer printable label stock made of polyester with permanent rubber-based adhesive, designed for high adhesion to textured metals and low surface energy plastics. ## Verified specifications - Adhesive	Permanent rubber based
Service temperature	-40 to 120 °C

Verified Target Applications & Use Cases

Industrial rating plates, asset identification, and electrical component labeling.

Brady B-489A Frequently Asked Questions & Engineering Guide

Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-489A.

Brady B-489A is engineered with an ultra-aggressive, high-tack rubber-modified acrylic adhesive system that delivers over 100 oz/inch of peel adhesion on low surface energy (LSE) plastics and textured powder-coated machine frames (28–32 dynes/cm). The thick adhesive layer flows into micro-valleys on rough surfaces, eliminating edge lifting that causes standard labels to fail.

Brady B-489A is rated for continuous service temperatures from -40°C to 120°C (-40°F to 248°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Need Custom Engineering Validation for Brady B-489A?

Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.

Ribbon Matcher Compare B-489A