Sponsored Technical Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-top-B-533]
Brady B-533label_film_tape8 Orderable SKUs
Brady B-533: B- 533 THERMAL TRANSFER PRINTABLE GLOSSY WHITE POLYESTER LABEL STOCK
BRADY B-533 is a thermal transfer printable glossy white polyester label stock with removable acrylic adhesive, suitable for alphanumeric and barcode applications requiring good solvent resistance, heat resistance, and clean removability.
Material Composition
White Polyester
Adhesive System
Removable Acrylic
Operating Temperature
-94°C to 200°C (-137°F to 392°F)
Total Thickness
—
Industrial Safety & Asset Marker
B-533 Application & Installation Blueprint
Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering
Industrial Fit Certified
Standard Industrial Marking Procedure
1Ensure application surface is dry and free of loose particulate or heavy oil.
2Peel and apply with steady firm pressure from center to edge.
3Allow 24 hours for ultimate cross-linked adhesion strength.
Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.
Substrate Compatibility & Adhesion Matrix
Smooth Metals & Stainless Steel
Standard Bond (5/5)
Rigid Thermoplastics & ABS
Standard Bond (4.8/5)
Painted Metal Cabinets
Standard Bond (4.8/5)
Glass & Smooth Composite
Standard Bond (4.8/5)
Tested Environmental Survivability
Industrial Plant Temperature SwingsDust, Grease & Mild FluidsStandard Abrasion & RubbingLong-Term Legend Legibility
Recommended Field & Shop Tools:
i3300 / i5100 Benchtop PrinterM210 / M610 Handheld ToolStandard Thermal Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-533.
Popular B-533 Formats
Standard industrial rolls and die-cut sizes with unit cost breakdown#1 Popular Choice
Standard Part
0.5 in H x 1 in W
Roll of 2500 Labels
Roll / Pack Total:$79.99 USD
Normalized Unit Cost:$0.032/label
Material Area Cost:$0.06/sq in
Supported Hardware:
BBP11BBP12THT 1" Core Printers
#2 Standard Format
Standard Part
2 in H x 3 in W
Roll of 1000 Labels
Roll / Pack Total:$232.99 USD
Normalized Unit Cost:$0.23/label
Material Area Cost:$0.04/sq in
Supported Hardware:
BBP81i5100i6100+5
#3 High Capacity
Standard Part
1 in H x 3 in W
Roll of 3000 Labels
Roll / Pack Total:$346.99 USD
Normalized Unit Cost:$0.12/label
Material Area Cost:$0.04/sq in
Supported Hardware:
BBP81i5100i6100+5
All 8 Orderable Part Numbers
Pricing: $79.99 – $346.99 USD
| Catalog SKU | Dimensions | Packaging / Qty | List Price & Unit Cost | Order MOQ | Compatible Printers | Hardware & Related |
|---|---|---|---|---|---|---|
THT-59-533-2.5-SCPopular UPC: 754473928612 | 0.5 in H x 1 in W | Roll of 2500 Labels | $79.99 USD $0.032/label ($3.20/100) $0.06/sq in | 1 ROL Standard Order | BBP11BBP12+1 | |
UPC: 754473928643 | 2 in H x 3 in W | Roll of 1000 Labels | $232.99 USD $0.23/label ($23.30/100) $0.04/sq in | 1 ROL Standard Order | BBP81i5100+6 | |
UPC: 754473928650 | 1 in H x 3 in W | Roll of 3000 Labels | $346.99 USD $0.12/label ($11.57/100) $0.04/sq in | 1 ROL Standard Order | BBP81i5100+6 | |
UPC: 754473928629 | 0.5 in H x 1 in W | Pack of 2 Rolls | $231.99 USD $0.023/label ($2.32/100) $0.05/sq in | 1 PAK Standard Order | BBP81i5100+6 | |
UPC: 754473928636 | 0.5 in H x 1 in W | Roll of 10000 Labels | $274.99 USD $0.027/label ($2.75/100) $0.05/sq in | 1 ROL Standard Order | BBP81i5100+6 | |
UPC: 754473928667 | 1 in H x 2 in W | Roll of 3000 Labels | $217.99 USD $0.073/label ($7.27/100) $0.04/sq in | 1 ROL Standard Order | BBP81i5100+6 | |
UPC: 754473928674 | 1 in H x 2 in W | Roll of 1500 Labels | $132.99 USD $0.089/label ($8.87/100) $0.04/sq in | 1 ROL Standard Order | BBP11BBP12+1 | |
UPC: 754473928681 | 0.437 in H x 0.5 in W | Roll of 10000 Labels | $170.99 USD $0.017/label ($1.71/100) $0.08/sq in | 1 ROL Standard Order | BBP81i5100+6 |
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 2 Years from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: -94°C to 200°C (-137°F to 392°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryHalogen-Free per DIN VDE 0472 Part 815
Environmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-533]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Series R4400
Series R4900
Series R6000 Halogen Free
Series R6200
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| Methyl Ethyl Ketone | Tested | Tested |
| Isopropyl Alcohol | Tested | Tested |
| Mineral Spirits | Tested | Tested |
| JP-8 Jet Fuel | Tested | Tested |
| Brake Fluid – DOT 3 | Tested | Tested |
| Skydrol® 500 B-4 | Tested | Tested |
| BIO-ACT EC-7R™ | Tested | Tested |
| MIL-5606 Oil | Tested | Tested |
| SAE 20 wt oil @ 70C | Tested | Tested |
| Formula 409® Cleaner | Tested | Tested |
| Deionized Water | Tested | Tested |
| 13% Alconox Detergent | Tested | Tested |
| 10% Sodium Hydroxide solution | Tested | Tested |
| 10% Sulfuric Acid solution | Tested | Tested |
| 3% Alconox® Detergent | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| 533 THERMAL TRANSFER PRINTABLE GLOSSY WHITE POLYESTER LABEL STOCK - Material Spec (Brady B-533) Material family | B-533 |
| 533 is a thermal transfer printable glossy white polyester label stock with removable acrylic adhesive, suitable for alphanumeric and barcode applications requiring good solvent resistance, heat resistance, and clean removability. ## Verified specifications - Material type | White Polyester |
| Service temperature | -94 to 200 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.
Brady B-533 Frequently Asked Questions & Engineering Guide
Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-533.
Need Custom Engineering Validation for Brady B-533?
Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.