Sponsored Technical Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-top-B-707A]
Brady B-707Alabel_film_tape10 Orderable SKUs
Brady B-707A: B-707A LASERTAB MARKERS
B-707A LASERTAB® MARKERS is a laser printable polyester material with permanent acrylic adhesive, suitable for telecommunications applications and computer housing units requiring solvent resistance and moderate to high temperature performance.
Material Composition
Polyester
Adhesive System
Permanent Acrylic
Operating Temperature
-40°C to 130°C (-40°F to 266°F)
Total Thickness
—
Industrial Safety & Asset Marker
B-707A Application & Installation Blueprint
Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering
Industrial Fit Certified
Standard Industrial Marking Procedure
1Ensure application surface is dry and free of loose particulate or heavy oil.
2Peel and apply with steady firm pressure from center to edge.
3Allow 24 hours for ultimate cross-linked adhesion strength.
Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.
Substrate Compatibility & Adhesion Matrix
Smooth Metals & Stainless Steel
Standard Bond (5/5)
Rigid Thermoplastics & ABS
Standard Bond (4.8/5)
Painted Metal Cabinets
Standard Bond (4.8/5)
Glass & Smooth Composite
Standard Bond (4.8/5)
Tested Environmental Survivability
Industrial Plant Temperature SwingsDust, Grease & Mild FluidsStandard Abrasion & RubbingLong-Term Legend Legibility
Recommended Field & Shop Tools:
i3300 / i5100 Benchtop PrinterM210 / M610 Handheld ToolStandard Thermal Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-707A.
Popular B-707A Formats
Standard industrial rolls and die-cut sizes with unit cost breakdown#1 Popular Choice
Standard Part
0.5 in H x 1.5 in W
Pack of 106 Sheets
Roll / Pack Total:$811.99 USD
Normalized Unit Cost:$0.081/label
Material Area Cost:$0.11/sq in
Supported Hardware:
Laser Printers
#2 Standard Format
Standard Part
0.375 in H x 1 in W
Pack of 58 Sheets
Roll / Pack Total:$598.99 USD
Normalized Unit Cost:$0.060/label
Material Area Cost:$0.16/sq in
Supported Hardware:
Laser Printers
#3 High Capacity
Standard Part
0.5 in H x 1 in W
Pack of 76 Sheets
Roll / Pack Total:$645.99 USD
Normalized Unit Cost:$0.065/label
Material Area Cost:$0.13/sq in
Supported Hardware:
Laser Printers
All 10 Orderable Part Numbers
Pricing: $223.99 – $811.99 USD
| Catalog SKU | Dimensions | Packaging / Qty | List Price & Unit Cost | Order MOQ | Compatible Printers | Hardware & Related |
|---|---|---|---|---|---|---|
LAT-47-707-10Popular UPC: 662820670643 | 0.5 in H x 1.5 in W | Pack of 106 Sheets | $811.99 USD $0.081/label ($8.12/100) $0.11/sq in | 1 PAK Standard Order | Laser Printers | |
LAT-8-707-10Popular UPC: 662820670605 | 0.375 in H x 1 in W | Pack of 58 Sheets | $598.99 USD $0.060/label ($5.99/100) $0.16/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820298205 | 0.5 in H x 1 in W | Pack of 76 Sheets | $645.99 USD $0.065/label ($6.46/100) $0.13/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820298298 | 0.375 in H x 3.6 in W | Pack of 63 Sheets | $339.99 USD $0.14/label ($13.60/100) $0.10/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820298366 | 1.437 in H x 3 in W | Pack of 84 Sheets | $417.99 USD $0.42/label ($41.80/100) $0.10/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820298229 | 1 in H x 2.5 in W | Pack of 38 Sheets | $223.99 USD $0.22/label ($22.40/100) $0.09/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820298380 | 0.375 in H x 1.5 in W | Pack of 80 Sheets | $669.99 USD $0.067/label ($6.70/100) $0.12/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820670599 | 0.375 in H x 0.5 in W | Pack of 31 Sheets | $346.99 USD $0.035/label ($3.47/100) $0.19/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820670636 | 0.5 in H x 0.5 in W | Pack of 41 Sheets | $398.99 USD $0.040/label ($3.99/100) $0.16/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820298243 | 1.44 in H x 2 in W | Pack of 56 Sheets | $279.99 USD $0.28/label ($28.00/100) $0.10/sq in | 1 PAK Standard Order | Laser Printers |
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: -40°C to 130°C (-40°F to 266°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryEnvironmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-707A]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| Methyl Ethyl Ketone | Tested | Tested |
| Toluene | Tested | Tested |
| Isopropyl Alcohol | Tested | Tested |
| Mineral Spirits | Tested | Tested |
| JP -8 Jet Fuel | Tested | Tested |
| IRM 903 Oil | Tested | Tested |
| Mil-H-5606 Oil | Tested | Tested |
| Skydrol® 500B-4 | Tested | Tested |
| Super Agitene® | Tested | Tested |
| Deionized Water | Tested | Tested |
| 3% Alconox® Detergent | Tested | Tested |
| 10% Sodium Hydroxide Solution | Tested | Tested |
| 10% Sulfuric Acid Solution | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| Service temperature | -40 to 130 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.
Brady B-707A Frequently Asked Questions & Engineering Guide
Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-707A.
Need Custom Engineering Validation for Brady B-707A?
Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.