HomeB-Numbers DirectoryB-747A
Sponsored Technical Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-top-B-747A]
Brady B-747Alabel_film_tape44 Orderable SKUs
Compare

Brady B-747A: B-747A LASERTAB® MARKERS

B-747A LASERTAB® MARKERS is a laser printable polyester material with permanent acrylic adhesive, suitable for alphanumeric and barcode applications requiring good solvent resistance and moderate to high temperature performance.

Material Composition
Polyester
Adhesive System
Permanent Acrylic
Operating Temperature
-40°C to 130°C (-40°F to 266°F)
Total Thickness
—
Industrial Safety & Asset Marker

B-747A Application & Installation Blueprint

Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering
Industrial Fit Certified
B-747A real-world industrial application
Installed in real-world industrial environment
Standard Industrial Marking Procedure
1Ensure application surface is dry and free of loose particulate or heavy oil.
2Peel and apply with steady firm pressure from center to edge.
3Allow 24 hours for ultimate cross-linked adhesion strength.
Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.
Substrate Compatibility & Adhesion Matrix
Smooth Metals & Stainless Steel
Standard Bond (5/5)
Rigid Thermoplastics & ABS
Standard Bond (4.8/5)
Painted Metal Cabinets
Standard Bond (4.8/5)
Glass & Smooth Composite
Standard Bond (4.8/5)
Tested Environmental Survivability
Industrial Plant Temperature SwingsDust, Grease & Mild FluidsStandard Abrasion & RubbingLong-Term Legend Legibility
Recommended Field & Shop Tools:
i3300 / i5100 Benchtop PrinterM210 / M610 Handheld ToolStandard Thermal Ribbon

Orderable Part Numbers, Packaging & Distributor SKUs

Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-747A.

Popular B-747A Formats

Standard industrial rolls and die-cut sizes with unit cost breakdown
#1 Popular Choice
Standard Part
11 in H x 8.5 in W
Pack of 25 Labels
Roll / Pack Total:$222.99 USD
Normalized Unit Cost:$8.92/label
Material Area Cost:$0.10/sq in
Supported Hardware:
Laser Printers
#2 Standard Format
Standard Part
0.25 in H x 0.8 in W
Pack of 33 Sheets
Roll / Pack Total:$367.99 USD
Normalized Unit Cost:$0.037/label
Material Area Cost:$0.18/sq in
Supported Hardware:
Laser Printers
Grainger
#3 High Capacity
Standard Part
0.5 in H x 1 in W
Pack of 10000 Labels
Roll / Pack Total:$613.99 USD
Normalized Unit Cost:$0.061/label
Material Area Cost:$0.12/sq in
Supported Hardware:
Laser Printers
Grainger
All 44 Orderable Part Numbers
Pricing: $59.99 – $749.99 USD
Catalog SKUDimensionsPackaging / QtyList Price & Unit CostOrder MOQCompatible PrintersHardware & Related
UPC: 662820297680
11 in H x 8.5 in WPack of 25 Labels
$222.99 USD
$8.92/label ($891.96/100)
$0.10/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297093
0.25 in H x 0.8 in WPack of 33 Sheets
$367.99 USD
$0.037/label ($3.68/100)
$0.18/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297185
0.5 in H x 1 in WPack of 10000 Labels
$613.99 USD
$0.061/label ($6.14/100)
$0.12/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297062
0.25 in H x 0.65 in WPack of 27 Sheets
$313.99 USD
$0.031/label ($3.14/100)
$0.19/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297154
0.25 in H x 1 in WPack of 10000 Labels
$389.99 USD
$0.039/label ($3.90/100)
$0.16/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297215
0.375 in H x 1 in WPack of 58 Sheets
$509.99 USD
$0.051/label ($5.10/100)
$0.14/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820245698
1 in H x 2.5 in WPack of 1000 Labels
$215.99 USD
$0.22/label ($21.60/100)
$0.09/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297000
0.25 in H x 0.3 in WPack of 12 Sheets
$305.99 USD
$0.031/label ($3.06/100)
$0.41/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297369
0.833 in H x 1.875 in WPack of 57 Sheets
$380.99 USD
$0.15/label ($15.24/100)
$0.10/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297246
0.25 in H x 1.5 in WPack of 53 Sheets
$425.99 USD
$0.043/label ($4.26/100)
$0.11/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297307
0.375 in H x 1.875 in WPack of 50 Sheets
$432.99 USD
$0.087/label ($8.66/100)
$0.12/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297710
0.2 in H x 0.65 in WPack of 21 Sheets
$313.99 USD
$0.031/label ($3.14/100)
$0.24/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820297123
0.5 in H x 0.8 in WPack of 10000 Labels
$610.99 USD
$0.061/label ($6.11/100)
$0.15/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820296904
0.9 in H x 2 in WPack of 1000 Labels
$169.99 USD
$0.17/label ($17.00/100)
$0.09/sq in
1 PAK
Standard Order
Laser Printers
UPC: 662820296966
1.437 in H x 3 in WPack of 56 Sheets
$398.99 USD
$0.40/label ($39.90/100)
$0.09/sq in
1 PAK
Standard Order
Laser Printers
Showing 1 to 15 of 44 parts
Page 1 of 3

Quality Assurance, Storage & Regulatory Compliance

Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.

Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: -40°C to 130°C (-40°F to 266°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL Directory
CSA C22.2: Not certified
CSA Directory
Environmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-747A]

ASTM Physical & Mechanical Properties

Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.

Physical PropertyTest MethodStandard Test Units (US)Metric Units (SI)
Dielectric BreakdownASTM D 1000 / ASTM D 26719160 Volts/mil—

Thermal Transfer Ribbon Compatibility

Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.

Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.

Chemical & Solvent Resistance Matrix

Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.

Tested per ASTM D 895 / Brady standard dip & rub immersion.
Chemical Reagent / SolventSubstrate / Adhesive EffectThermal Ribbon Permanence
Methyl Ethyl KetoneTestedTested
TolueneTestedTested
Isopropyl AlcoholTestedTested
Mineral SpiritsTestedTested
JP -8 Jet FuelTestedTested
IRM 903 OilTestedTested
Mil-H-5606 OilTestedTested
Skydrol® 500B-4TestedTested
Super Agitene®TestedTested
Deionized WaterTestedTested
3% Alconox® DetergentTestedTested
10% Sodium Hydroxide SolutionTestedTested
10% Sulfuric Acid SolutionTestedTested

Environmental & Aging Durability Testing

Environmental Exposure ConditionObservation & Legibility Result
Service temperature-40 to 130 °C

Verified Target Applications & Use Cases

  • Industrial rating plates, asset identification, and electrical component labeling.

Brady B-747A Frequently Asked Questions & Engineering Guide

Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-747A.

Brady B-747A is a high-performance Polyester designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Permanent Acrylic engineered for long-term industrial reliability in environments requiring -40°C to 130°C (-40°F to 266°F) performance.

Brady B-747A is rated for continuous service temperatures from -40°C to 130°C (-40°F to 266°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Need Custom Engineering Validation for Brady B-747A?
Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.