Brady B-7570 label_film_tape
Brady B-7570: B-7570 Brady Nite-Glo B-7570 is a rigid photoluminescent polypropylene sign used for safety applications with consistent glow life and unlimited rechargeability.
Adhesive System Non-Adhesive
Operating Temperature -40°C to 65°C (-40°F to 149°F)
Industrial Safety & Asset Marker B-7570 Application & Installation Blueprint Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering
Installed in real-world industrial environment Inspect Standard Industrial Marking Procedure 1 Ensure application surface is dry and free of loose particulate or heavy oil.
2 Peel and apply with steady firm pressure from center to edge.
3 Allow 24 hours for ultimate cross-linked adhesion strength.
Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.
Substrate Compatibility & Adhesion Matrix Smooth Metals & Stainless Steel
Rigid Thermoplastics & ABS
Tested Environmental Survivability Industrial Plant Temperature Swings Dust, Grease & Mild Fluids Standard Abrasion & Rubbing Long-Term Legend Legibility Recommended Field & Shop Tools:
i3300 / i5100 Benchtop Printer M210 / M610 Handheld Tool Standard Thermal Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-7570 .
Custom orderable roll sizes, continuous tapes, and die-cut parts for B-7570 are available through authorized Brady distributors.
Quality Assurance, Storage & Regulatory Compliance Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits Min Application Temp: 50°F (10°C)
Service Temp Range: -40°C to 65°C (-40°F to 149°F)
Full Cure / Dwell Time: 24 Hours (ASTM D1000)Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories Environmental & Safety Standards RoHS 3 Compliance: 2011/65/EU (Pass 2015/863)
REACH Status: SVHC Free (<0.1% w/w)
CA Prop 65: Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Engineering Limitations & Chemical Fitness Warnings Extracted directly from Brady Technical Data Sheets to prevent real-world application failures and chemical degradation:
Not recommended for outdoor application Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-7570]
ASTM Physical & Mechanical Properties Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Physical Property Test Method Standard Test Units (US) Metric Units (SI)
Thermal Transfer Ribbon Compatibility Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
Chemical Reagent / Solvent Substrate / Adhesive Effect Thermal Ribbon Permanence Methyl ethyl ketone Tested Tested Toluene Tested Tested Isopropyl alcohol Tested Tested Ethanol (96%) Tested Tested n-Hexane Tested Tested Acetone Tested Tested Gasoline Tested Tested Diesel Tested Tested De ionized water Tested Tested 5% NaOH Tested Tested 10% Sulphuric acid solution Tested Tested 10% NaCl solution Tested Tested 5% Soap Extran MA 02 neutral Tested Tested
Environmental & Aging Durability Testing Environmental Exposure Condition Observation & Legibility Result Service temperature -40 to 65 °C
Verified Target Applications & Use Cases Industrial rating plates, asset identification, and electrical component labeling. Brady B-7570 Frequently Asked Questions & Engineering Guide Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-7570 .
Expand All Applications & Sizing
What are the primary industrial applications for Brady B-7570 (B-7570)? Brady B-7570 is a high-performance Industrial substrate designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Specialty adhesive engineered for long-term industrial reliability in environments requiring -40°C to 65°C (-40°F to 149°F) performance.
Temperature & Environment
What is the continuous operating temperature range for Brady B-7570? Brady B-7570 is rated for continuous service temperatures from -40°C to 65°C (-40°F to 149°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.
Adhesion & Substrates
How well does Brady B-7570 adhere to stainless steel, powder coat, and plastic surfaces? Ribbons & Hardware
Which thermal transfer ribbons and Brady printers are compatible with B-7570? Chemical Resistance
How does Brady B-7570 withstand industrial chemicals, solvents, and fuels? Standards & Compliance
Is Brady B-7570 UL Recognized, CSA Accepted, or Halogen-Free? Limitations & Troubleshooting
What are the critical engineering limitations and warnings for Brady B-7570? Need Custom Engineering Validation for Brady B-7570? Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.
