Sponsored Technical Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-top-B-799]
Brady B-799label_film_tape12 Orderable SKUs
Brady B-799: B-799 LASER PRINTABLE NYLON CLOTH LABEL
Brady B-799 is a polyamide coated nylon cloth label with a permanent acrylic adhesive, designed for indoor wiremarking and general labeling applications.
Material Composition
polyamide coated nylon cloth
Adhesive System
permanent acrylic pressure sensitive adhesive
Operating Temperature
From -40°C
Total Thickness
6.5 mils (0.165 mm)
Flexible Nylon Cloth
B-799 Application & Installation Blueprint
Repositionable Nylon Cloth & DIN Rail Label • Physical application tolerances and surface engineering
Industrial Fit Certified
Conformable Cloth Wire & Terminal Marking
1Wrap tightly around wire leads or press firmly across DIN terminal block rows.
2Flexible woven cloth matrix conforms seamlessly to irregular cable curves with zero flagging.
3Can be cleanly removed and repositioned during cabinet wiring changes without leaving sticky residue.
Engineering Tolerance: High-conformability woven polyamide coating grips tight wire curves without flagging or memory spring-back.
Substrate Compatibility & Adhesion Matrix
Terminal Block Rows (Phoenix/WAGO)
High Grip (5/5)
Multi-Conductor Cable Bundles
No Flagging (5/5)
DIN Rail Relay Sockets
Clean Removal (4.8/5)
Patch Panel Wire Flags
High Conform (5/5)
Tested Environmental Survivability
High Flexibility & No FlaggingClean RemovabilityMild Solvents & OilCabinet Temperatures (-40°F to 194°F)
Recommended Field & Shop Tools:
M210 Handheld ToolM610 Wire MarkerTHT Benchtop Printer
Orderable Part Numbers, Packaging & Distributor SKUs
Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-799.
Popular B-799 Formats
Standard industrial rolls and die-cut sizes with unit cost breakdown#1 Popular Choice
Standard Part
0.75 in H x 0.5 in W
Pack of 33 Sheets
Roll / Pack Total:$369.99 USD
Normalized Unit Cost:$0.074/label
Material Area Cost:$0.20/sq in
Supported Hardware:
Laser Printers
#2 Standard Format
Standard Part
1.437 in H x 1 in W
Pack of 24 Sheets
Roll / Pack Total:$307.99 USD
Normalized Unit Cost:$0.31/label
Material Area Cost:$0.21/sq in
Supported Hardware:
Laser Printers
#3 High Capacity
Standard Part
0.375 in H x 1 in W
Pack of 58 Sheets
Roll / Pack Total:$677.99 USD
Normalized Unit Cost:$0.068/label
Material Area Cost:$0.18/sq in
Supported Hardware:
Laser Printers
All 12 Orderable Part Numbers
Pricing: $105.99 – $942.99 USD
| Catalog SKU | Dimensions | Packaging / Qty | List Price & Unit Cost | Order MOQ | Compatible Printers | Hardware & Related |
|---|---|---|---|---|---|---|
LAT-40-799-5Popular UPC: 662820296850 | 0.75 in H x 0.5 in W | Pack of 33 Sheets | $369.99 USD $0.074/label ($7.40/100) $0.20/sq in | 1 PAK Standard Order | Laser Printers | |
LAT-39-799-1Popular UPC: 662820296829 | 1.437 in H x 1 in W | Pack of 24 Sheets | $307.99 USD $0.31/label ($30.80/100) $0.21/sq in | 1 PAK Standard Order | Laser Printers | |
LAT-8-799-10Popular UPC: 662820296751 | 0.375 in H x 1 in W | Pack of 58 Sheets | $677.99 USD $0.068/label ($6.78/100) $0.18/sq in | 1 PAK Standard Order | Laser Printers | |
LAT-37-799-2.5Popular UPC: 662820296799 | 1.437 in H x 0.8 in W | Pack of 47 Sheets | $491.99 USD $0.20/label ($19.68/100) $0.17/sq in | 1 PAK Standard Order | Laser Printers | |
LAT-37-799-1Popular UPC: 662820296782 | 1.437 in H x 0.8 in W | Pack of 19 Sheets | $246.99 USD $0.25/label ($24.70/100) $0.21/sq in | 1 PAK Standard Order | Laser Printers | |
LAT-38-799-2.5Popular UPC: 662820296812 | 1.437 in H x 0.5 in W | Pack of 33 Sheets | $334.99 USD $0.13/label ($13.40/100) $0.19/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820296775 | 0.2 in H x 0.65 in W | Pack of 21 Sheets | $402.99 USD $0.040/label ($4.03/100) $0.31/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820296836 | 1.437 in H x 1 in W | Pack of 60 Sheets | $639.99 USD $0.26/label ($25.60/100) $0.18/sq in | 1 PAK Standard Order | Laser Printers | |
LAT-40-799-1Popular UPC: 662820296843 | 0.75 in H x 0.5 in W | Pack of 7 Sheets | $105.99 USD $0.11/label ($10.60/100) $0.28/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820894056 | 0.375 in Dia | Pack of 9 Sheets | $163.99 USD $0.066/label ($6.56/100) | 1 PAK Standard Order | Laser Printers | |
UPC: 662820296768 | 0.25 in H x 1.5 in W | Pack of 53 Sheets | $942.99 USD $0.094/label ($9.43/100) $0.25/sq in | 1 PAK Standard Order | Laser Printers | |
UPC: 662820296744 | 0.5 in H x 1 in W | Pack of 76 Sheets | $829.99 USD $0.083/label ($8.30/100) $0.17/sq in | 1 PAK Standard Order | Laser Printers |
Quality Assurance, Storage & Regulatory Compliance
Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage
Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits
Min Application Temp: 50°F (10°C)
Service Temp Range: Standard Industrial
Full Cure / Dwell Time: 24 Hours (ASTM D1000)
Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories
UL 969 / 2238: Non-approved variant
UL DirectoryCSA C22.2: Not certified
CSA DirectoryEnvironmental & Safety Standards
RoHS 3 Compliance:2011/65/EU (Pass 2015/863)
REACH Status:SVHC Free (<0.1% w/w)
CA Prop 65:Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Engineering Limitations & Chemical Fitness Warnings
Extracted directly from Brady Technical Data Sheets to prevent real-world application failures and chemical degradation:
- not recommended for outdoor use
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-799]
ASTM Physical & Mechanical Properties
Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Thermal Transfer Ribbon Compatibility
Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer
Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix
Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
| Chemical Reagent / Solvent | Substrate / Adhesive Effect | Thermal Ribbon Permanence |
|---|---|---|
| Methyl Ethyl Ketone (reagent); No visible effect (effect_to_label); Moderate print removal (effect_to_print_without_rub) | Tested | Tested |
| 1,1,1-Trichloroethane (reagent); No visible effect (effect_to_label); Moderate print removal (effect_to_print_without_rub) | Tested | Tested |
| Isopropyl Alcohol (reagent); No visible effect (effect_to_label); Complete print removal (effect_to_print_with_rub) | Tested | Tested |
| Mineral Spirits (reagent); No visible effect (effect_to_label); Complete print removal (effect_to_print_with_rub) | Tested | Tested |
| Northwoods Buzz Saw Degreaser (reagent); No visible effect (effect_to_label); Complete print removal (effect_to_print_with_rub) | Tested | Tested |
| SAE 20 WT Oil at 70°C (reagent); No visible effect, label discoloration (effect_to_label) | Tested | Tested |
| Mil 5606 Oil (reagent); Slight unwrap, label stained red (effect_to_label) | Tested | Tested |
| Speedi Kut Cutting Oil 332 (reagent); No unwrap, label discoloration (effect_to_label) | Tested | Tested |
| Gasoline (reagent); Adhesive failure, label discoloration (effect_to_label) | Tested | Tested |
| Rust Veto 342 (reagent); Moderate unwrap, label discoloration (effect_to_label) | Tested | Tested |
| Deionized Water (reagent); No visible effect (effect_to_print_without_rub) | Tested | Tested |
| 3% Alconox Detergent (reagent); No visible effect (effect_to_print_without_rub) | Tested | Tested |
| 5% Salt Solution (reagent); No visible effect (effect_to_print_without_rub) | Tested | Tested |
| 10% Sodium Hydroxide Solution (reagent); Complete unwrap (effect_to_label) | Tested | Tested |
| 10% Sulfuric Acid Solution (reagent); No visible effect (effect_to_print_with_rub) | Tested | Tested |
| methyl ethyl ketone | Tested | Tested |
| 1,1,1-trichloroethane | Tested | Tested |
| isopropyl alcohol | Tested | Tested |
| mineral spirits | Tested | Tested |
| Northwoods™ Buzz Saw Degreaser | Tested | Tested |
| SAE 20 WT Oil at 70°C | Tested | Tested |
| Mil 5606 Oil | Tested | Tested |
| Speedi Kut Cutting Oil 332 | Tested | Tested |
| gasoline | Tested | Tested |
| Rust Veto® 342 | Tested | Tested |
| deionized water | Tested | Tested |
| 3% Alconox® Detergent | Tested | Tested |
| 5% Salt Solution | Tested | Tested |
| 10% Sodium Hydroxide Solution | Tested | Tested |
| 10% Sulfuric Acid Solution | Tested | Tested |
Environmental & Aging Durability Testing
| Environmental Exposure Condition | Observation & Legibility Result |
|---|---|
| Service temperature (min) | -40 °C |
Verified Target Applications & Use Cases
- Industrial rating plates, asset identification, and electrical component labeling.
Brady B-799 Frequently Asked Questions & Engineering Guide
Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-799.
Need Custom Engineering Validation for Brady B-799?
Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.