Brady B-8593 label_film_tape
Brady B-8593: B-8593RAISEDPANELLABEL B-8593RAISEDPANELLABEL is a polyester label with an acrylic pressure-sensitive adhesive, available in various colors and printed using thermal transfer technology.
Adhesive System AcrylicPressureSensitive
Operating Temperature Standard Industrial
B-8593 Application & Installation Blueprint Raised Panel Push-Button Plate (Engraved Replacement) • Physical application tolerances and surface engineering
Installed in real-world industrial environment Inspect Raised Panel Nameplate Installation 1 Clean electrical cabinet surface with isopropyl alcohol to remove machine cutting fluids.
2 Peel thick release liner and position plate centered over 22mm or 30mm push button hole cutout.
3 Press firmly across foam surface; closed-cell foam backing compresses and creates permanent solvent barrier.
Engineering Tolerance: 0.65 mm foam-backed polyester replicates rigid engraved Bakelite plates at 80% lower cost and zero wait time.
Substrate Compatibility & Adhesion Matrix Painted Steel Control Panels
Permanent Foam Bond (5/5) Stainless Steel NEMA 4X Enclosures
Permanent Foam Bond (5/5) Cast Aluminum Machinery Frames
Permanent Foam Bond (4.9/5) Polycarbonate HMI Operator Bezels
Permanent Foam Bond (5/5) Tested Environmental Survivability NEMA 4X Washdown Machine Cutting Fluids UV Sunlight & Weathering Impact & Scratching Recommended Field & Shop Tools:
i3300 / BBP33 Smart Benchtop M510 Portable Maker R6000 Resin Ribbon
Orderable Part Numbers, Packaging & Distributor SKUs Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-8593 .
Custom orderable roll sizes, continuous tapes, and die-cut parts for B-8593 are available through authorized Brady distributors.
Quality Assurance, Storage & Regulatory Compliance Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.
Shelf Life & Warehouse Storage Expected Shelf Life: 1 Year from receipt
Storage Temperature: Below 80°F (27°C)
Relative Humidity: ≤ 60% RH
Must be stored in original packaging in a climate-controlled warehouse.
Application vs Service Limits Min Application Temp: 50°F (10°C)
Service Temp Range: Standard Industrial
Full Cure / Dwell Time: 24 Hours (ASTM D1000)Clean surface of oil/grease before bonding for maximum peel strength.
Agency Testing & File Directories Environmental & Safety Standards RoHS 3 Compliance: 2011/65/EU (Pass 2015/863)
REACH Status: SVHC Free (<0.1% w/w)
CA Prop 65: Compliant Notice
Certificates of Conformance (CoC) available on order shipment.
Sponsored Industrial Label Solutions
Industrial Label Printers & Materials
Relevant Technical Equipment & Consumables [Ad Slot spec-mid-B-8593]
ASTM Physical & Mechanical Properties Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.
Physical Property Test Method Standard Test Units (US) Metric Units (SI)
Thermal Transfer Ribbon Compatibility Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.
Recommended Thermal Transfer Non-printable hardware, tag, or pre-printed material.
* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.
Chemical & Solvent Resistance Matrix Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.
Tested per ASTM D 895 / Brady standard dip & rub immersion.
Chemical Reagent / Solvent Substrate / Adhesive Effect Thermal Ribbon Permanence 10%NaCl Tested Tested 10%H2SO4 Tested Tested 10%NaOH Tested Tested
Verified Target Applications & Use Cases Industrial rating plates, asset identification, and electrical component labeling. Brady B-8593 Frequently Asked Questions & Engineering Guide Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-8593 .
Expand All Applications & Sizing
What are the primary industrial applications for Brady B-8593 (B-8593RAISEDPANELLABEL)? Brady B-8593 is a high-performance Industrial substrate designed specifically for rating plates, asset tags, and industrial equipment identification. It features a AcrylicPressureSensitive engineered for long-term industrial reliability in environments requiring standard industrial operating range performance.
Temperature & Environment
What is the continuous operating temperature range for Brady B-8593? Brady B-8593 is rated for continuous service temperatures from standard industrial operating range. In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.
Adhesion & Substrates
How well does Brady B-8593 adhere to stainless steel, powder coat, and plastic surfaces? Ribbons & Hardware
Which thermal transfer ribbons and Brady printers are compatible with B-8593? Chemical Resistance
How does Brady B-8593 withstand industrial chemicals, solvents, and fuels? Standards & Compliance
Is Brady B-8593 UL Recognized, CSA Accepted, or Halogen-Free? Limitations & Troubleshooting
What surface preparation is required before installing Brady B-8593? Need Custom Engineering Validation for Brady B-8593? Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.
