How well does Brady B-969B adhere to stainless steel, powder coat, and plastic surfaces?

Brady B-969B uses a Permanent acrylic adhesive. For optimum bond strength, surfaces should be cleaned with an isopropyl alcohol (IPA) wipe and allowed to dwell for 24 hours prior to full chemical or mechanical stress.

Which thermal transfer ribbons and Brady printers are compatible with B-969B?

The official manufacturer-recommended thermal transfer ribbon for Brady B-969B is Brady Series R4300, R6000 Halogen-Free, or R6200 resin ribbons. Using the recommended resin or hybrid ribbon ensures crisp edge definition, high-density 2D DataMatrix scanning, and compliance with abrasion rub standards. Compatible Brady printers include benchtop industrial systems (i3300, i5100, i7100, BBP33) as well as rugged portable field printers (M510, M610, and M710) depending on the SKU form factor.

How does Brady B-969B withstand industrial chemicals, solvents, and fuels?

Brady B-969B resists common industrial reagents including lubricating oils, water, mild acids, and aliphatic solvents.

Is Brady B-969B UL Recognized, CSA Accepted, or Halogen-Free?

Brady B-969B meets RoHS 2011/65/EU and REACH (SVHC) directives.

What surface preparation is required before installing Brady B-969B?

To achieve maximum bond strength, ensure the bonding substrate is clean, dry, and free of machining oils, silicone mold release agents, or dust. Wipe the surface with a 50/50 Isopropyl Alcohol (IPA) and water solution using a lint-free wipe, allow to evaporate completely, and apply firm, uniform roller or thumb pressure across the entire label face.

Home B-Numbers DirectoryB-969B

Brady B-969Blabel_film_tape

Compare

Brady B-969B: Matte Metallized Polyester Label Stock

Q: What are the primary industrial applications for Brady B-969B (Matte Metallized Polyester Label Stock)?

Brady B-969B is a high-performance Metallized polyester designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Permanent acrylic engineered for long-term industrial reliability in environments requiring up to 120°C (248°F) performance.

Q: What is the continuous operating temperature range for Brady B-969B?

Brady B-969B is rated for continuous service temperatures from up to 120°C (248°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Brady B-969B is a metallized polyester label stock with matte finish, permanent acrylic adhesive, and good resistance to solvents and high temperatures.

Material Composition

Metallized polyester

Adhesive System

Permanent acrylic

Operating Temperature

Up to 120°C

Total Thickness

—

Industrial Safety & Asset Marker

B-969B Application & Installation Blueprint

Heavy-Duty Industrial Safety & Identification Marker • Physical application tolerances and surface engineering

Industrial Fit Certified

B-969B real-world industrial application

Installed in real-world industrial environment

Standard Industrial Marking Procedure

1Ensure application surface is dry and free of loose particulate or heavy oil.

2Peel and apply with steady firm pressure from center to edge.

3Allow 24 hours for ultimate cross-linked adhesion strength.

Engineering Tolerance: Engineered to withstand standard industrial plant environmental conditions and indoor/outdoor temperature swings.

Substrate Compatibility & Adhesion Matrix

Smooth Metals & Stainless Steel

Standard Bond (5/5)

Rigid Thermoplastics & ABS

Standard Bond (4.8/5)

Painted Metal Cabinets

Standard Bond (4.8/5)

Glass & Smooth Composite

Standard Bond (4.8/5)

Tested Environmental Survivability

Industrial Plant Temperature SwingsDust, Grease & Mild FluidsStandard Abrasion & RubbingLong-Term Legend Legibility

Recommended Field & Shop Tools:

i3300 / i5100 Benchtop PrinterM210 / M610 Handheld ToolStandard Thermal Ribbon

Orderable Part Numbers, Packaging & Distributor SKUs

Official Brady SKUs, roll dimensions, package quantities, list pricing, Grainger part numbers, and printer compatibility for B-969B.

Custom orderable roll sizes, continuous tapes, and die-cut parts for B-969B are available through authorized Brady distributors.

Quality Assurance, Storage & Regulatory Compliance

Standardized engineering guidelines for warehouse storage, application temperature, and agency certifications.

Shelf Life & Warehouse Storage

Expected Shelf Life: 1 Year from receipt

Storage Temperature: Below 80°F (27°C)

Relative Humidity: ≤ 60% RH

Must be stored in original packaging in a climate-controlled warehouse.

Application vs Service Limits

Min Application Temp: 50°F (10°C)

Service Temp Range: Up to 120°C

Full Cure / Dwell Time: 24 Hours (ASTM D1000)

Clean surface of oil/grease before bonding for maximum peel strength.

Agency Testing & File Directories

UL 969 / 2238: Non-approved variant

UL Directory

CSA C22.2: Not certified

CSA Directory

Environmental & Safety Standards

RoHS 3 Compliance:2011/65/EU (Pass 2015/863)

REACH Status:SVHC Free (<0.1% w/w)

CA Prop 65:Compliant Notice

Certificates of Conformance (CoC) available on order shipment.

ASTM Physical & Mechanical Properties

Standardized laboratory test data measured in accordance with ASTM D 1000, ASTM D 2979, and ASTM D 2671.

Physical Property	Test Method	Standard Test Units (US)	Metric Units (SI)

Thermal Transfer Ribbon Compatibility

Official Brady recommended ribbons engineered for maximum contrast, smear resistance, and UL certification compliance.

Recommended Thermal Transfer

Non-printable hardware, tag, or pre-printed material.

* Note: Testing print permanence with official Brady ribbons is required to maintain UL/CSA agency certification on printed labels.

Chemical & Solvent Resistance Matrix

Standardized dip and rub immersion test observations across industrial fuels, oils, solvents, and cleaners.

Tested per ASTM D 895 / Brady standard dip & rub immersion.

Chemical Reagent / Solvent	Substrate / Adhesive Effect	Thermal Ribbon Permanence
Methyl Ethyl Ketone (reagent); Slight adhesive ooze (effect_to_label_stock); 3 (effect_to_print)	Tested	Tested
Isopropyl Alcohol (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
Mineral Spirits (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
JP-8 Jet Fuel (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
SAE 20 WT Oil (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
Mil-H-5606 Oil (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
Rust Veto 377HF (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
Speedi Cut 332 Cutting Oil (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
Gasoline (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
Skydrol 500B-4 (reagent); Slight adhesive ooze, topcoat softened (effect_to_label_stock); 2 (effect_to_print)	Tested	Tested
Super Agitene (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
Deionized Water (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
3% Alconox Detergent (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
Northwoods Buzz Saw Degreaser (reagent); No visible effect (effect_to_label_stock); 1 (effect_to_print)	Tested	Tested
Methyl Ethyl Ketone	Tested	Tested
Isopropyl Alcohol	Tested	Tested
Mineral Spirits	Tested	Tested
JP-8 Jet Fuel	Tested	Tested
SAE 20 WT Oil	Tested	Tested
Mil-H-5606 Oil	Tested	Tested
Rust Veto® 377HF	Tested	Tested
Speedi Cut 332 Cutting Oil	Tested	Tested
Gasoline	Tested	Tested
Skydrol® 500B-4	Tested	Tested
Super Agitene®	Tested	Tested
Deionized Water	Tested	Tested
3% Alconox® Detergent	Tested	Tested
Northwoods™ Buzz Saw Degreaser	Tested	Tested

Environmental & Aging Durability Testing

Environmental Exposure Condition	Observation & Legibility Result
Service temperature (max)	120 °C

Verified Target Applications & Use Cases

Industrial rating plates, asset identification, and electrical component labeling.

Brady B-969B Frequently Asked Questions & Engineering Guide

Verified technical answers on physical adhesion, temperature thresholds, ribbon pairings, and replacement standards for B-969B.

Brady B-969B is a high-performance Metallized polyester designed specifically for rating plates, asset tags, and industrial equipment identification. It features a Permanent acrylic engineered for long-term industrial reliability in environments requiring up to 120°C (248°F) performance.

Brady B-969B is rated for continuous service temperatures from up to 120°C (248°F). In laboratory heat-aging tests, it maintains dimensional stability and barcode contrast across broad thermal cycles.

Need Custom Engineering Validation for Brady B-969B?

Calculate conductor sizing, check chemical resistance charts, or find matching thermal transfer ribbons.

Ribbon Matcher Compare B-969B